|
|
|
National Stock Number:
5315-00-200-3176
Federal Supply Class:
5315
National Item Identification Number:
002003176
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2444662-501 | 18355 | THE BOEING COMPANY | | 2444662-501 | 88277 | THE BOEING COMPANY | | 401624 | 77948 | SINGER CO THE | | 60A52B64-501 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 60A52C58-7 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.500 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.104 INCHES MINIMUM AND 0.111 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 431 OVERALL | | PIN OVERALL LENGTH | 2.750 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.4355 INCHES MINIMUM AND 0.4365 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.104 INCHES MINIMUM AND 0.111 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
|
|