|
|
|
National Stock Number:
5315-00-200-3174
Federal Supply Class:
5315
National Item Identification Number:
002003174
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2444691 | 18355 | THE BOEING COMPANY | | 2444691 | 88277 | THE BOEING COMPANY | | 401620 | 77948 | SINGER CO THE | | 60A52B60 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.063 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.045 INCHES MINIMUM AND 0.051 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 431 OVERALL | | PIN OVERALL DIAMETER | 0.1540 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.750 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.045 INCHES MINIMUM AND 0.051 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
|
|