9390-00-180-7673, NONMETALLIC CHANNEL

National Stock Number:
9390-00-180-7673

Federal Supply Class:
9390

National Item Identification Number:
001807673

Description:
NONMETALLIC CHANNEL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM NONMETALLIC MATERIAL(S) HAVING TWO VERTICAL FLANGES THAT EXTEND IN THE SAME DIRECTION FROM EACH END OF A HORIZONTAL BASE. THE VERTICAL FLANGES MAY HAVE VARIOUS TYPE TIPS AND ADDITIONAL FLANGES WHICH EXTEND ON THE SAME PLANE AS THE BASE. IT MAY HAVE A REINFORCING AGENT(S) AND BACKING EXCLUDES SEAL, NONMETALLIC CHANNEL.

Manufacturer Information:

16600349-001	28009	SYPRIS ELECTRONICS, LLC
MILR3065	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
X693	70485	ATLANTIC INDIA RUBBER CO INC

Techincal Specification:

BASE FLANGE THICKNESS	0.047 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE	OPEN CHANNEL
ENVIRONMENTAL PROTECTION	TEAR AND WATER RESISTANT AND LOW TEMPERATURE AND HIGH TEMPERATURE
FIRST SLOT/GROOVE DEPTH	0.171 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS	0.047 INCHES NOMINAL
LEFT-SIDE FLANGE TIP STYLE	LEFT SQUARE END
OVERALL HEIGHT	0.218 INCHES NOMINAL
OVERALL WIDTH	0.218 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-STD-417, TYPE T, CLASS TA, GRADE TA512B3EGL MIL STD SINGLE MATERIAL RESPONSE
MATERIAL	RUBBER SYNTHETIC
MINIMUM TENSILE STRENGTH	1200 POUNDS PER SQUARE INCH
NONMETALLIC HARDNESS RATING	45.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A
RIGHT-SIDE FLANGE TIP STYLE	RIGHT SQUARE END
RIGHT SIDE FLANGE HEIGHT	0.218 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.047 INCHES NOMINAL
TEMP RATING	-102.0 FAHRENHEIT AND 447.0 FAHRENHEIT

Click here to Register for Free 30-day Trial