|
|
|
National Stock Number:
6680-00-221-1051
Federal Supply Class:
6680
National Item Identification Number:
002211051
Description:
SHAFT ASSEMBLY,FLEXIBLE
Detail:
An item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
|
Manufacturer Information:
| 2FS9L6 | 7Z588 | NORMA PENNSYLVANIA INC. DIV BREEZE INDUSTRIAL PRODUCTS | | 505-0002 | 09790 | EATON AEROSPACE LLC DBA STERER ENGINEERING DIV VALVE & ACTUATOR | | FS-2-9-L6 IN | 7Z588 | NORMA PENNSYLVANIA INC. DIV BREEZE INDUSTRIAL PRODUCTS |
|
Techincal Specification:
| CASING MATERIAL | STEEL | | CASING SURFACE TREATMENT | GALVANIZED | | CASING LENGTH BETWEEN FERRULES | 6.000 INCHES NOMINAL | | CASING OUTSIDE DIAMETER | 0.440 INCHES NOMINAL | | CASING PROTECTIVE DEVICE TYPE | COILED SPRING PROTECTOR | | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS | | THREAD LOCATION | INTERNAL BOTH ENDS | | SCREW THREAD SERIES DESIGNATOR | UNS BOTH ENDS | | THREAD DIRECTION | RIGHT-HAND BOTH ENDS | | THREAD LENGTH | 0.438 INCHES NOMINAL BOTH ENDS | | END OVERALL DIAMETER | 1.000 INCHES NOMINAL BOTH ENDS | | SWIVEL END | PROVIDED BOTH ENDS | | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS | | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS | | CORE MATERIAL | STEEL, CARBON | | CORE OVERALL LENGTH | 6.000 INCHES NOMINAL | | CORE DIAMETER | 0.183 INCHES MINIMUM AND | | 0.188 INCHES MAXIMUM | | CORE ROTATION DIRECTION | CLOCKWISE OR | | COUNTERCLOCKWISE | | END TYPE | ROUND KEYED FIRST END | | TIP LENGTH | 0.688 INCHES NOMINAL FIRST END | | CROSS SECTION SIZE AND LOCATION | 0.183 INCHES MINIMUM DIAMETER AND | | 0.188 INCHES MAXIMUM DIAMETER FIRST END | | TONGUE THICKNESS | 0.054 INCHES MINIMUM AND | | 0.063 INCHES MAXIMUM FIRST END | | SETSCREW | NOT INCLUDED FIRST END | | MINIMUM OPERATING RADIUS | 4.000 INCHES | | SPECIAL FEATURES | INPUT END TYPE SAE MARINE FITTING;OUTPUT END TYPE SAE TACH HEAVY FITTING;FERRULE AND COUPLING NUTS MATERIAL BRASS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 7Z588 | | DESIGN CONTROL REFERENCE | FS-2-9-L6 IN |
|
|