| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | GENERAL PURPOSE |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NONVENTILATED |
| CURRENT RATING IN AMPS | 0.300 SINGLE INPUT |
| CURRENT RATING METHOD | NO LOAD |
| FEATURES PROVIDED | FRAME ELECTRICALLY GROUNDED AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FLAT DEPTH | 0.031 INCHES NOMINAL IDENTICAL ENDS |
| FLATTED PORTION LENGTH | 0.620 INCHES NOMINAL IDENTICAL ENDS |
| HOLE CENTER TO SHAFT END DISTANCE | 0.562 INCHES NOMINAL IDENTICAL ENDS |
| HOLE DEPTH | 0.472 INCHES NOMINAL IDENTICAL ENDS |
| LENGTH OF SHAFT FROM HOUSING | 2.375 INCHES SINGLE END |
| OVERALL LENGTH | 9.125 INCHES |
| OVERALL WIDTH | 5.812 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| MOUNTING METHOD | CLAMP RING |
| ROTOR SPEED RATING IN RPM | 1800.0 SINGLE NO LOAD |
| SHAFT END CHARACTERISTIC | A13 SECOND STYLE SECOND END |
| SHAFT END CHARACTERISTIC | A5 FIRST STYLE FIRST END |
| SHAFT DIAMETER | 0.249 INCHES NOMINAL FIRST END |
| SHAFT DIAMETER | 0.472 INCHES NOMINAL SECOND END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE IDENTICAL ENDS |
| WINDING TYPE | PERMANENT MAGNET |
| TEMP RATING | 0.0 OPERATING CELSIUS AND 55.0 OPERATING CELSIUS |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| TEST DATA DOCUMENT | 12578-30004A002 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TORQUE RATING AND TYPE | 12.0 INCH-OUNCES RUNNING |