|
|
|
National Stock Number:
5977-00-179-4895
Federal Supply Class:
5977
National Item Identification Number:
001794895
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 10912456 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 26C212P02 | 0AHP6 | NATIONAL ELECTRICAL CARBON PRODUCTS, INC. | | 26C212P02 | 34990 | NATIONAL ELECTRICAL CARBON PRODUCTS INC EAST STROUDSBURG-PA | | 5977001794895 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5977001794895 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| ANGLE | 30.5 DEGREES NOMINAL | | BASIC SHAPE STYLE | UNTHREADED SINGLE THROUGH HOLE | | BEVEL ANGLE | 8.0 DEGREES NOMINAL | | BODY STYLE | RECTANGULAR COMMUTATOR | | BRUSH SHUNT LENGTH | 1.134 INCHES NOMINAL SINGLE SHUNT | | CLIP TYPE | NEMA HAMMER TYPE OFFSET A | | COMPONENT BRUSH QUANTITY PER MULTIPLE BRUSH | 2 | | CONTACT FACE STYLE | CONCAVE ON BEVEL | | DISTANCE FROM BRUSH TOP TO HOLE CENTERLINE | 0.437 INCHES NOMINAL | | DISTANCE FROM CENTER OF HOLE TO OUTSIDE EDGE | 0.199 INCHES NOMINAL | | HOLE DIAMETER | 0.031 INCHES NOMINAL | | LENGTH | 1.312 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | NATIONAL CARBON GRADE R834 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | CARBON | | RADIUS | 1.440 INCHES NOMINAL | | SHUNT INSULATION PROVISION AND QUANTITY | 1 UNINSULATED | | SHUNT POSITION DESIGNATOR | 3 AND 9 | | SPECIAL FEATURES | BEVELED EDGE LOCATION LEFT AND RIGHT | | WIDTH | 1.312 INCHES NOMINAL | | STYLE DESIGNATOR | ONE PIECE | | TERMINAL HOLE DIAMETER | 0.203 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 1 TUBULAR W/HOLE | | THICKNESS | 0.398 INCHES NOMINAL | | TOP STYLE | BEVELED FRONT |
|
|