|
|
|
National Stock Number:
5970-00-173-2349
Federal Supply Class:
5970
National Item Identification Number:
001732349
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 10545613 | 19200 | US ARMY ARDEC RDECOM | | 5970001732349 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5970001732349 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| INSIDE DIAMETER | 0.256 INCHES MINIMUM AND 0.271 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM | | OVERALL HEIGHT | 0.140 INCHES NOMINAL | | MATERIAL AND LOCATION | OVERALL FIBER, MIL-F-1148, GRADE CH-CANCELLED/REPLACED BY ASTM D710 OR OVERALL PLASTIC, PHENOLIC, MIL-P-79, TYPE PBE-CANCELLED/REPLACED BY MIL-I-24768/10 | | SPECIAL FEATURES | THICKNESS TAPERED FROM 0.140 IN. TO 0.084 IN. | | STYLE DESIGNATOR | ROUND, FLAT |
|
|