5905-00-189-2922 RESISTOR,FIXED,WIRE WOUND Index 5945-00-189-2925 RELAY,REED

National Stock Number:
5955-00-189-2923

Federal Supply Class:
5955

National Item Identification Number:
001892923

Description:
CRYSTAL UNIT,QUARTZ

Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.


Manufacturer Information:
CR130/U1M00000081349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-3098/10981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-3098/10981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
NE6A00815NEL FREQUENCY CONTROLS INC
NE6A19397BAE SYSTEMS INFORMATION & ELECTRONIC SYSTEMS INTEGRATION INC.


Techincal Specification:
DRIVE LEVEL RATING8.0 MILLIWATTS MINIMUM AND 12.0 MILLIWATTS MAXIMUM
BODY LENGTH0.775 INCHES MAXIMUM
BODY WIDTH0.725 INCHES MAXIMUM
BODY THICKNESS0.317 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.478 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
CIRCUIT RESONANCEANTIRESONANCE
EQUIVALENT RESISTANCE VALUE IN OHMS570.0 MAXIMUM
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT-0.002 TO 0.002 AND -0.003 TO 0.003
LOAD CAPACITANCE IN PICOFARADS29.5 MINIMUM AND 30.5 MAXIMUM
OVERALL LENGTH0.998 INCHES MINIMUM AND 1.023 INCHES MAXIMUM
OVERALL THICKNESS0.352 INCHES MAXIMUM
OVERALL WIDTH0.757 INCHES MAXIMUM
MATERIALGLASS COVER, HOLDER
MODE OF OSCILLATIONFUNDAMENTAL
OPERATING TEMP RANGE-40.0 TO 90.0 CELSIUS AND -55.0 TO 105.0 CELSIUS
SHUNT CAPACITANCE IN PICOFARADS7.0 MAXIMUM
SPECIFICATION/STANDARD DATA81349-MIL-C-3098/109 GOVERNMENT SPECIFICATION
SPECIFIED FREQUENCY1.0003 MEGAHERTZ
STYLE DESIGNATORSQUARE BODY
TERMINAL LENGTH0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM
TERMINAL DIAMETER0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM
TEST DATA DOCUMENT81349-MIL-C-3098/62 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial