|
|
|
National Stock Number:
5940-00-191-2746
Federal Supply Class:
5940
National Item Identification Number:
001912746
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 10243868 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 812-JJ-3/4ST-05-FP | 26405 | REGAL BELOIT AMERICA, INC | | 812JJ3-4ST5F | 83330 | DIALIGHT CORPORATION |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.203 INCHES | | BASE THICKNESS | 0.406 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD HEIGHT EXCLUDING TERMINALS | 0.719 INCHES | | BOARD OVERALL HEIGHT | 0.719 INCHES | | BOARD OVERALL LENGTH | 3.781 INCHES | | BOARD OVERALL WIDTH | 0.750 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.375 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.562 INCHES | | CURRENT RATING IN AMPS | 30.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1600.0 | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.375 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC DIALLYL PHTHALATE AND GLASS FIBER BOARD | | MOUNTING HOLE DIAMETER | 0.209 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | NONFEEDTHRU TERMINAL QUANTITY | 5 FIRST AND 5 SECOND | | NONFEEDTHRU TERMINAL TYPE | 857 FIRST AND 193 SECOND | | SPECIAL FEATURES | VARNISH MACHINED ENDS WITH FUNGUS,MOISTURE RESISTANT VARNISH | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 |
|
|