5935-00-211-2324 ADAPTER,CONNECTOR Index 5955-00-211-2326 OVEN,ELECTRICAL-ELECTRONIC COMPO

National Stock Number:
5935-00-211-2325

Federal Supply Class:
5935

National Item Identification Number:
002112325

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
150000-011471468ITT CANNON LLC
1729808718ITT CANNON ELECTRIC PHOENIX DIV
2225-000-G091-200795DELTA ELECTRONICS MANUFACTURING CORP
5935PL20028549009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
580R807H0295077SV MICROWAVE, INC.
580R807H0297942NORTHROP GRUMMAN SYSTEMS CORPORATION


Techincal Specification:
BODY STYLESTRAIGHT SHAPE W/FLANGE
OVERALL LENGTH0.995 INCHES MINIMUM AND
1.005 INCHES MAXIMUM
OVERALL HEIGHT0.682 INCHES MINIMUM AND
0.692 INCHES MAXIMUM
OVERALL WIDTH0.682 INCHES MINIMUM AND
0.692 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.495 INCHES MINIMUM AND
0.505 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.495 INCHES MINIMUM AND
0.505 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.290 INCHES MINIMUM AND
0.330 INCHES MAXIMUM
UNTHREADED MOUNTING HOLE DIAMETER0.124 INCHES MINIMUM AND
0.128 INCHES MAXIMUM
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
THREADED DEVICE TYPECOUPLING FACILITY
THREAD SERIES DESIGNATORUNEF AND
UNS
NOMINAL THREAD SIZE0.438 INCHES AND
0.250 INCHES
THREAD CLASS2A
THREAD QUANTITY PER INCH28 AND
36
THREAD DIRECTIONRIGHT-HAND
SHELL TYPESOLID
SHELL MATERIALSTEEL COMP 303
SHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE
MATING END QUANTITY2
INSERT MATERIALPLASTIC TETRAFLUOROETHYLENE ALL MATING ENDS
INCLUDED CONTACT QUANTITY1 1ST MATING END SINGLE CONTACT GROUPING
1 2ND MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITYREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS
INCLUDED CONTACT TYPECOAXIAL PIN 1ST MATING END SINGLE CONTACT GROUPING
COAXIAL SOCKET 2ND MATING END SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT MATERIALCOPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE OR
QQ-C-533,COND H FED SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENTGOLD AND
COPPER ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE II,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND
MIL-C-14550,CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND
SALT WATER RESISTANT AND
VIBRATION RESISTANT
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.010 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us