|
|
|
National Stock Number:
5935-00-201-8422
Federal Supply Class:
5935
National Item Identification Number:
002018422
Description:
ADAPTER,CONNECTOR
Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.
|
Manufacturer Information:
| 83050 | 74868 | AMPHENOL CORPORATION | | B185044-0000 | 30184 | BUTLER NATIONAL CORP | | MS90266TYPEUG701U | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | UG701U | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. | | UG701U | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM |
|
Techincal Specification:
| BUSHING ACCOMMODATION HOLE SHAPE | ROUND | | CONNECTOR LOCKING METHOD | BAYONET PIN | | CONTACT MATERIAL | SILVER SINGLE MATING END 2ND CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END 1ST CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | C ALL MATING ENDS | | CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS | | CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END 1ST CONTACT GROUPING | | CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END 2ND CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | WEATHERPROOF | | INCLUDED CONTACT QUANTITY | 1 ALL MATING ENDS ALL CONTACT GROUPINGS | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | MATING END QUANTITY | 2 | | NOMINAL THREAD SIZE | 0.750 INCHES | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 ALL MATING ENDS ALL CONTACT GROUPINGS | | SHELL MATERIAL | COPPER ALLOY | | SHELL SURFACE TREATMENT | SILVER | | SHELL TYPE | SOLID | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC | | THREADED DEVICE TYPE | MOUNTING BUSHING |
|
|