|
|
|
National Stock Number:
5935-00-201-3143
Federal Supply Class:
5935
National Item Identification Number:
002013143
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| CS1320-1S425 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-12520/16 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC12520 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY ANGLE IN DEG | 90.0 | | CABLE ENTRANCE DIAMETER | 0.425 INCHES MAXIMUM | | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP | | CONNECTOR LOCKING METHOD | SCREW | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 900.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 35.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 1250.0 SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | WATERTIGHT | | INCLUDED CONTACT QUANTITY | 4 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | OVERALL HEIGHT | 1.500 INCHES MAXIMUM | | OVERALL LENGTH | 2.906 INCHES MAXIMUM | | OVERALL WIDTH | 2.625 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | NONDEFINITIVE SPEC/STD DATA | CS-1320/1/S/.425 TYPE | | SPECIAL FEATURES | POLARIZED | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-12520 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-C-12520 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|