|
|
|
National Stock Number:
5935-00-177-2016
Federal Supply Class:
5935
National Item Identification Number:
001772016
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| AS81703 | 0U583 | SAE INTERNATIONAL | | AS81703 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MILC26482 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3135-3A | 0U583 | SAE INTERNATIONAL | | MS3135-3A | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS3135-3A | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS81703 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.526 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | SPRING FRICTION | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM | | INSERT MATERIAL | RUBBER SINGLE MATING END | | OVERALL HEIGHT | 0.896 INCHES MAXIMUM | | OVERALL LENGTH | 0.583 INCHES MINIMUM AND 0.614 INCHES MAXIMUM | | OVERALL WIDTH | 0.896 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-26482 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNTHREADED MOUNTING HOLE DIAMETER | 0.104 INCHES MINIMUM AND 0.136 INCHES MAXIMUM |
|
|