| DISTANCE FROM MOUNTING SHOULDER TO REAR FACE | 0.360 INCHES NOMINAL |
| BODY STYLE | ANGLE SHAPE, EXTERNAL COUPLING |
| BUSHING DIAMETER | 0.312 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | BNC SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| FLANGE LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END |
| OVERALL HEIGHT | 1.125 INCHES MAXIMUM |
| OVERALL LENGTH | 1.094 INCHES NOMINAL |
| OVERALL WIDTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| PRECIOUS MATERIAL AND LOCATION | CONTACTSURFACE GOLD AND BODY SURFACE SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.101 GOLD GRAINS, TROY AND 0.101 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 22 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | COPPER |
| SHELL SURFACE TREATMENT | SILVER |
| SHELL TYPE | SOLID |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |