5935-00-156-3691, CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-156-3691

Federal Supply Class:
5935

National Item Identification Number:
001563691

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

10400	71468	ITT CANNON LLC
1211-043-A181	00795	DELTA ELECTRONICS MANUFACTURING CORP
1211043A181-000	00795	DELTA ELECTRONICS MANUFACTURING CORP
150213-0260	71468	ITT CANNON LLC
C148-3-1	81755	LOCKHEED MARTIN CORPORATION
T3800W-15	C0932	ZAHNRADFABRIKATION ULRICH STAEHELY
TRU-9177	92180	WINCHESTER INTERCONNECT RF CORPORATION
TRU177	92180	WINCHESTER INTERCONNECT RF CORPORATION

Techincal Specification:

BODY STYLE	STRAIGHT SHAPE W/CABLE CLAMP
CONTACT POSITION ARRANGEMENT STYLE	TNC SINGLE MATING END
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY	1 SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY	1
OVERALL LENGTH	1.156 INCHES NOMINAL
OVERALL HEIGHT	0.750 INCHES NOMINAL
OVERALL WIDTH	0.750 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.531 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.531 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.550 INCHES NOMINAL
CONNECTOR LOCKING METHOD	EXTERNALLY THREADED SHELL
THREADED DEVICE TYPE	COUPLING FACILITY
THREAD SERIES DESIGNATOR	UNEF
NOMINAL THREAD SIZE	0.438 INCHES
THREAD CLASS	2A
THREAD QUANTITY PER INCH	28
THREAD DIRECTION	RIGHT-HAND
CONNECTOR CABLE STRAIN RELIEF METHOD	COMPRESSION NUT
SHELL TYPE	SOLID
SHELL MATERIAL	COPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-626,COMP 22,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE
SHELL SURFACE TREATMENT	SILVER
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE
INSERT MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END
INSERT MATERIAL DOCUMENT AND CLASSIFICATION	MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	500.0 SINGLE MATING END SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS	50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-530,COMP HT FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	SILVER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION	MOISTURE PROOF AND
	SALT WATER RESISTANT AND
	VIBRATION RESISTANT
PRECIOUS MATERIAL	SILVER
PRECIOUS MATERIAL AND WEIGHT	0.105 SILVER GRAINS, TROY
PRECIOUS MATERIAL AND LOCATION	CONTACT AND BODY SURFACES SILVER

Click here to Register for Free 30-day Trial