| CONTACT LOAD CURRENT RATING | 30.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 30.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 250.0 DC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 500.0 AC AT SEA LEVEL |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 3.812 INCHES NOMINAL 2ND MOUNTING FACILITY |
| FEATURES PROVIDED | ACTUATOR KNOB |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND VIBRATION RESISTANT |
| INDIVIDUAL SECTION QUANTITY | 10 |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 2.281 INCHES NOMINAL 1ST MOUNTING FACILITY |
| LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 2.281 INCHES NOMINAL 1ST MOUNTING FACILITY |
| OVERALL HEIGHT | 3.688 INCHES NOMINAL |
| OVERALL LENGTH | 6.813 INCHES NOMINAL |
| OVERALL WIDTH | 4.375 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR 1ST MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE 2ND MOUNTING FACILITY |
| MOUNTING METHOD | BRACKET AND THREADED HOLE 1ST MOUNTING FACILITY |
| MOUNTING METHOD | BRACKET AND UNTHREADED HOLE 2ND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.250 INCHES 1ST MOUNTING FACILITY |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-15291/6 GOVERNMENT SPECIFICATION |
| STYLE DESIGNATOR | TAP, CIRCUIT SELECTOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 90.0 DEGREES SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP NONSYMMETRICAL |
| TERMINAL TYPE | TAB W/SCREW |
| TEST DATA DOCUMENT | 81349-MIL-S-15291 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2B 1ST MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 20 1ST MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC 1ST MOUNTING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.312 INCHES NOMINAL 2ND MOUNTING FACILITY |