5925-00-189-4312, CIRCUIT BREAKER

National Stock Number:
5925-00-189-4312

Federal Supply Class:
5925

National Item Identification Number:
001894312

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

AP1-4-42-102	81541	SENSATA TECHNOLOGIES MARYLAND, INC
SM-A-569574-79	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
SM6-1-250-400-1	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
ARC QUENCHING METHOD	MAGNETIC BLOWOUT
BODY LENGTH	1.448 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
BODY STYLE	SINGLE POLE TYPE
BODY WIDTH	0.567 INCHES MINIMUM AND 0.629 INCHES MAXIMUM
BUSHING LENGTH	0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
CIRCUIT PROTECTION TYPE	OVERCURRENT SINGLE LOCATION
FRAGILITY FACTOR	MODERATELY RUGGED
FREQUENCY IN HERTZ	400.0 SINGLE LOCATION
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	EXPLOSION RESISTANT AND HERMETICALLY SEALED
INTERNAL TRIP RELEASE CONFIGURATION	RELAY TRIP SINGLE LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	1.0 AMPERES AC SINGLE LOCATION
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC SINGLE LOCATION
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING W/PANEL SEAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.524 INCHES MINIMUM AND 1.586 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.375 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	120.0 AC SINGLE LOCATION
POLE QUANTITY	1
RESET METHOD	MANUAL
SPECIAL HANDLING FEATURE	MAGNETIC
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
TERMINAL TYPE AND QUANTITY	2 TAB, SOLDER LUG AND 2 WIRE HOOK
TEST DATA DOCUMENT	80063-SM-A-569574 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
THREAD QUANTITY PER INCH	32
THREAD PITCH DIAMETERS	+0.3503 TO 0.3537 INCHES
THREAD SERIES DESIGNATOR	UNEF
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.900 MINIMUM AT 200 PCT AND 4.000 MAXIMUM AT 200 PCT SINGLE LOCATION
TRIP RELEASE CHARACTERISTIC	TIME DELAY SINGLE LOCATION
TRIP RELEASE METHOD	MAGNETIC SINGLE LOCATION
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 SINGLE LOCATION

Click here to Register for Free 30-day Trial