| ELECTRICAL POLARIZATION | POLARIZED |
| ANODE TYPE | SOLID |
| BODY HEIGHT | 0.150 INCHES MAXIMUM |
| BODY LENGTH | 0.250 INCHES MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY WIDTH | 0.150 INCHES MAXIMUM |
| CAPACITANCE VALUE PER SECTION | 3.300 MICROFARADS SINGLE SECTION |
| CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| CASE INSULATION MATERIAL | PLASTIC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.095 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| DC LEAKAGE AT MAXIMUM OPERATING TEMP | 22.5 MILLIAMPERES |
| DC LEAKAGE AT REFERENCE TEMP | 1.500 MICROAMPERES |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0600 |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 20.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TEST DATA DOCUMENT | 80045-1502-15 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE RANGE PER SECTION | -0.00 TO 20.00 PERCENT SINGLE SECTION |