|
|
|
National Stock Number:
5910-00-196-4628
Federal Supply Class:
5910
National Item Identification Number:
001964628
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 515194 | 64547 | HONEYWELL INTERNATIONAL, INC | | 515194-1 | 64547 | HONEYWELL INTERNATIONAL, INC | | 515194-1 | 70210 | HONEYWELL INTERNATIONAL INC. | | EP31059 | 99515 | ELECTRON PRODUCTS INC | | TWU114-2 | 00853 | CORNELL-DUBILIER MARKETING INC | | TWU114-2 | 14655 | CORNELL-DUBILIER ELECTRONICS | | TWV114-2 | 00853 | CORNELL-DUBILIER MARKETING INC | | TWV114-2 | 14655 | CORNELL-DUBILIER ELECTRONICS |
|
Techincal Specification:
| BODY DIAMETER | 0.980 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | BODY LENGTH | 2.000 INCHES MAXIMUM | | BODY STYLE | W/MTG BRACKET, TERMINAL(S) ON ONE END | | CAPACITANCE VALUE PER SECTION | 0.080 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.445 INCHES NOMINAL | | DIELECTRIC MATERIAL | PLASTIC | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED MOUNTING HOLES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 AC-RMS SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 0.250 INCHES NOMINAL | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION | | UNTHREADED MOUNTING HOLE DIAMETER | 0.650 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
|
|