| ELECTRICAL POLARIZATION | POLARIZED |
| ANODE TYPE | SOLID |
| BODY HEIGHT | 0.075 INCHES MAXIMUM |
| BODY LENGTH | 0.185 INCHES MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY WIDTH | 0.225 INCHES MAXIMUM |
| CAPACITANCE VALUE PER SECTION | 4.700 MICROFARADS SINGLE SECTION |
| CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| DC LEAKAGE AT MAXIMUM OPERATING TEMP | 15.0 MILLIAMPERES |
| DC LEAKAGE AT REFERENCE TEMP | 1.000 MICROAMPERES |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 6.0000 |
| MATERIAL | PLASTIC CASE |
| MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR | N-3 |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 20.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL LENGTH | 1.620 INCHES NOMINAL |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TEST DATA DOCUMENT | 97942-578R920 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE RANGE PER SECTION | -20.00 TO 20.00 PERCENT SINGLE SECTION |