| BODY STYLE | ROTARY |
| INCLOSURE TYPE | ENCASED |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| CAPACITANCE RANGE IN PICOFARADS | 3.0 TO 13.0 ALL SECTIONS |
| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 2 SLOTTED SCREW |
| TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| INDIVIDUAL SECTION QUANTITY | 2 |
| NONDERATED VOLTAGE RATING AND TYPE | 500.0 DC CONTINUOUS ALL SECTIONS |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND |
| 85.0 DEG CELSIUS MAXIMUM |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | -300.0 ALL SECTIONS |
| CAPACITANCE CHANGE IN PERCENT AT OPERATING TEMP FROM 25 DEG CELSIUS | -1.00 TO 3.50 MINIMUM AND |
| -2.50 TO -0.50 MAXIMUM ALL SECTIONS |
| BODY DIAMETER | 1.297 INCHES NOMINAL |
| BODY LENGTH | 1.290 INCHES MINIMUM AND |
| 1.310 INCHES MAXIMUM |
| BODY WIDTH | 0.870 INCHES MINIMUM AND |
| 0.890 INCHES MAXIMUM |
| BODY HEIGHT | 0.297 INCHES MINIMUM AND |
| 0.406 INCHES MAXIMUM |
| ADJUSTMENT DEVICE TORQUE | 4.000 INCH-OUNCES MINIMUM AND |
| 24.000 INCH-OUNCES MAXIMUM |
| TERMINAL LENGTH | 0.220 INCHES MINIMUM AND |
| 0.310 INCHES MAXIMUM |
| TERMINAL THICKNESS | 0.011 INCHES MINIMUM AND |
| 0.021 INCHES MAXIMUM |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.145 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.156 INCHES NOMINAL |
| TEST DATA DOCUMENT | 81349-MIL-C-81 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-81/3 GOVERNMENT SPECIFICATION |
| CAPACITANCE DRIFT IN PICOFARADS | 0.50 ALL SECTIONS |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 10000.0 MEGOHMS |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | CV21B130 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-C-81/3 |