| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 280.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS ALL SECTIONS |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 ALL SECTIONS |
| BODY DIAMETER | 2.000 INCHES MAXIMUM |
| BODY LENGTH | 10.890 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 ALL SECTIONS |
| OVERALL DIAMETER | 2.156 INCHES NOMINAL |
| OVERALL LENGTH | 12.390 INCHES NOMINAL |
| MAXIMUM RUNNING TORQUE | 18.50 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 18.50 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES |
| MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| SPECIAL FEATURES | 2 RHMS NO. 0.112-40 THD IN. BY 11.438 IN. @LG THROUGH BODY OF RESISTOR W/0.500 IN. THD EXTENDING FROM REAR |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 3.0 HEAT SINK ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 291.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 18 |
| SHAFT BEARING TYPE | SLEEVE |
| SHAFT END PLAY | 0.015 INCHES |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 1.000 INCHES NOMINAL |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 140.0 ALL SECTIONS |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 72 TAB, SOLDER LUG |