| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1080.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| BODY DIAMETER | 1.875 INCHES NOMINAL |
| BODY LENGTH | 1.250 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION |
| LATERAL RUNOUT | 0.001 INCHES |
| OVERALL DIAMETER | 2.241 INCHES MAXIMUM |
| OVERALL LENGTH | 1.875 INCHES NOMINAL |
| MAXIMUM RUNNING TORQUE | 0.90 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.30 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL |
| MOUNTING METHOD | UNTHREADED HOLE |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.203 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.8750 INCHES NOMINAL |
| PILOT DIAMETER | 1.8130 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 3.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT BEARING TYPE | BALL |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT DIAMETER | 0.2497 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.0005 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.625 INCHES NOMINAL |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -15.0 TO 15.0 OHMS SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 1.844 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |