| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 334.000 OHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BODY DIAMETER | 2.031 INCHES MAXIMUM |
| BODY LENGTH | 1.156 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION |
| LATERAL RUNOUT | 0.003 INCHES |
| OVERALL DIAMETER | 2.250 INCHES MAXIMUM |
| OVERALL LENGTH | 1.812 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.1 |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING METHOD | THREADED HOLE |
| PILOT DIAMETER RUNOUT | 0.00200 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 340.0 MINIMUM AND 344.0 MAXIMUM |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 1 |
| SHAFT BEARING TYPE | BALL |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.625 INCHES NOMINAL |
| SPECIAL FEATURES | MOUNTING HOLES EQUALLY SPACED ON A 0.625 IN. RADIUS |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.219 INCHES MAXIMUM |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 TURRET |
| TEST DATA DOCUMENT | 89944-71010052 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |