|
|
|
National Stock Number:
5905-00-176-2277
Federal Supply Class:
5905
National Item Identification Number:
001762277
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 116FL1-358 | 08815 | HONEYWELL INTERNATIONAL INC | | 1300-1000 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 14313 | 10138 | ASTRONAUTICS CORPORATION OF AMERICA | | 14313 | 22830 | SYMETRICS INDUSTRIES, LLC | | 17C1-2160 | 19176 | SERVO INSTRUMENT CORPORATION |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 40.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.062 INCHES MAXIMUM | | BODY LENGTH | 0.625 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FIXED TAP QUANTITY PER SECTION | 4 SINGLE SECTION | | FRAGILITY FACTOR | MODERATELY RUGGED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION GRAPH | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION | | LATERAL RUNOUT | 0.004 INCHES | | OVERALL DIAMETER | 1.162 INCHES MAXIMUM | | OVERALL LENGTH | 1.121 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 1.10 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.0620 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 0.5000 INCHES NOMINAL | | PILOT LENGTH | 0.0400 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.002 INCHES | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BALL | | SHAFT END PLAY | 0.005 INCHES | | SHAFT DIAMETER | 0.1248 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.0035 INCHES | | SHAFT RUNOUT | 0.002 INCHES | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT LENGTH | 0.465 INCHES NOMINAL | | TAP LOCATION TOLERANCE PER SECTION | -10.0 TO 10.0 DEG ANGULAR ROTATION ALL SECTIONS | | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 5 TURRET | | TEST DATA DOCUMENT | 10138-14313 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 0.965 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
|
|