|
|
|
National Stock Number:
5905-00-175-5606
Federal Supply Class:
5905
National Item Identification Number:
001755606
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 589022-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | T9161224G1 | 99971 | LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 13.562 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 3.719 INCHES NOMINAL | | BODY LENGTH | 2.094 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL STUDS MOUNTED | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | FRAGILITY FACTOR | MODERATELY RUGGED | | MOUNTING FACILITY QUANTITY | 3 | | MOUNTING METHOD | THREADED HOLE | | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 6.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -0.4 TO 0.4 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNC | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.469 INCHES NOMINAL | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 6781.0 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -0.5 TO 0.5 DEG ANGULAR ROTATION SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
|
|