|
|
|
National Stock Number:
5905-00-043-0629
Federal Supply Class:
5905
National Item Identification Number:
000430629
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 5935008350508 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7325222 | 98748 | AIR FORCE UNITED STATES DEPARTMENT OF THE DBA TINKER AFB OC ALC DSP | | MD19-10-10-2411 | 04454 | SENSOR SYSTEMS, L.L.C. | | MS19-10-10-2411 | 04454 | SENSOR SYSTEMS, L.L.C. | | 900217-238 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS 1ST SECTION | | 10.000 KILOHMS 2ND SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 1ST SECTION | | -5.0 TO 5.0 2ND SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.035 TO 0.035 SINGLE SECTION | | SHAFT RUNOUT | 0.0005 INCHES | | LATERAL RUNOUT | 0.0005 INCHES | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | SHAFT RADIAL PLAY | 0.0005 INCHES | | SHAFT BEARING TYPE | BALL | | SHAFT END PLAY | 0.00200 INCHES | | MAXIMUM STOP TORQUE | 240.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 2.30 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 1.80 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -25.0 TO 25.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 130.0 SINGLE SECTION | | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION | | 1 2ND SECTION | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 1.56200 INCHES MAXIMUM | | PILOT LENGTH | 0.06200 INCHES NOMINAL | | UNDERCUT DIAMETER | 1.625 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.07800 INCHES MINIMUM | | BODY DIAMETER | 1.830 INCHES MAXIMUM | | BODY LENGTH | 1.690 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.81200 INCHES MAXIMUM | | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.1248 INCHES MAXIMUM | | SHAFT LENGTH | 0.500 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3780.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 8 SOLDER STUD | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 06481-900217-238 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | OVERALL LENGTH | 2.206 INCHES MAXIMUM | | OVERALL DIAMETER | 2.005 INCHES MAXIMUM | | PRECIOUS MATERIAL | PALLADIUM AND | | GOLD AND | | SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.002 PALLADIUM OUNCES, TROY AND | | 0.001 GOLD OUNCES, TROY AND | | 0.056 SILVER OUNCES, TROY | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 06481 | | DESIGN CONTROL REFERENCE | 900217-238 |
|
|