|
|
|
National Stock Number:
5365-00-176-0852
Federal Supply Class:
5365
National Item Identification Number:
001760852
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5365PL0784601 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 9687M52P02 | 07482 | GENERAL ELECTRIC COMPANY | | 9687M52P04 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | OVERALL LENGTH | 0.595 INCHES MINIMUM AND 0.605 INCHES MAXIMUM | | OVERALL WIDTH | 0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5536 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | ONE EDGE ALONG THE WIDTH DIMENSION IS CURVED. STARTING FROM THE MID-POINT OF THE OPPOSITE SIDE,THE CURVED SIDE HAS A RADIUS OF 0.600 TO 0.700 IN.. EACH CORNER OF THIS EDGE HAS A RADIUS OF 0.100 TO 0.160 IN. | | STYLE DESIGNATOR | RECTANGULAR |
|
|