5365-00-176-0621, SPACER,PLATE

National Stock Number:
5365-00-176-0621

Federal Supply Class:
5365

National Item Identification Number:
001760621

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

369A2096-1	02731	MCDONNELL DOUGLAS HELICOPTER CO INC
369A2096-1	1KVX4	MD HELICOPTERS INC
369A2096-1	8V613	THE BOEING COMPANY

Techincal Specification:

BOLT HOLE QUANTITY	2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HOLE DIAMETER	0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM
OUTSIDE CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.650 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.420 INCHES MINIMUM AND 0.480 INCHES MAXIMUM
OVERALL LENGTH	1.750 INCHES MINIMUM AND 1.810 INCHES MAXIMUM
OVERALL WIDTH	1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	369A79530 MFR REF SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	ANODIZE

Click here to Register for Free 30-day Trial