|
|
|
National Stock Number:
5340-00-209-7504
Federal Supply Class:
5340
National Item Identification Number:
002097504
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| 800 | 57068 | STANLEY WORKS THE | | A-A-55586 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | A-A-55586-4 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AA55586-4 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS27966-4 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY WIDTH | 1.500 INCHES NOMINAL | | HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE QUANTITY | 5 | | KNUCKLE TYPE | FRICTION | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626, COMP 11 FED SPEC SINGLE MATERIAL RESPONSE PIN | | MATERIAL THICKNESS | 0.068 INCHES NOMINAL | | MATERIAL | COPPER ALLOY AND STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 PIN | | MOUNTING HOLE DIAMETER | 0.144 INCHES NOMINAL | | MOUNTING HOLE QUANTITY | 4 | | PERFORMANCE TYPE | NOT RATED | | PIN CENTER TO BODY EDGE DISTANCE | 0.750 INCHES NOMINAL | | PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 2, CLASS 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-Z-325, TYPE 2, CLASS 2 FED SPEC 2ND TREATMENT RESPONSE BODY | | SURFACE TREATMENT | CADMIUM AND ZINC BODY |
|
|