|
|
|
National Stock Number:
5340-00-193-0443
Federal Supply Class:
5340
National Item Identification Number:
001930443
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 3829880-1 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.729 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.312 INCHES NOMINAL | | CENTER SECTION WIDTH | 2.969 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.812 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.300 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 2.656 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.200 INCHES NOMINAL | | FIRST LEG END RADIUS | 0.500 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.377 INCHES MINIMUM AND 0.381 INCHES MAXIMUM | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.312 INCHES NOMINAL | | FIRST LEG WIDTH | 1.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/12 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | MOUNTING HOLE TYPE | PLAIN | | REINFORCEMENT METHOD | RIB STIFFENER | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 2.625 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG THICKNESS | 0.156 INCHES NOMINAL | | SECOND LEG WIDTH | 2.969 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|