|
|
|
National Stock Number:
5340-00-182-5014
Federal Supply Class:
5340
National Item Identification Number:
001825014
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| 2142545-1 | 18355 | THE BOEING COMPANY | | 2142545-1 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.750 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CORNER RADIUS | 0.125 INCHES NOMINAL | | FIRST LEG LENGTH | 1.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.562 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.257 INCHES MINIMUM AND 0.267 INCHES MAXIMUM | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 2.875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4130 | | MOUNTING HOLE TYPE | COUNTERSUNK | | SECOND LEG LENGTH | 1.250 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE AND TAPERED | | SECOND LEG END WIDTH | 1.875 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 2.875 INCHES NOMINAL | | SPECIAL FEATURES | HEAT TREATMENT: NORMALIZED | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT | CADMIUM |
|
|