| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.219 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.770 INCHES MINIMUM AND 1.790 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| SECOND LEG END RADIUS | 0.380 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.500 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |