| FIRST LEG ANGLE | 90.5 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG END WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |