|
|
|
National Stock Number:
5320-00-181-6220
Federal Supply Class:
5320
National Item Identification Number:
001816220
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| AF6091-4C-8 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | AF6091-4C8 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | CR9562-4-8 | 05693 | CHERRY TEXTRON INC CHERRY COMMERCIAL FASTENERS PRODUCTS DIV OF TEXTRON INC | | CR9562-4-8 | 11815 | SPS TECHNOLOGIES, LLC | | MS20601MP4W8 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RV291-4-8 | 98996 | OLYMPIC FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.587 INCHES MINIMUM AND 0.607 INCHES MAXIMUM | | GRIP LENGTH | 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | HEAD MAJOR DIAMETER | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY SLEEVE | | MATERIAL | NICKEL ALLOY STEM | | SHANK DIAMETER | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM | | SHANK STYLE | SELF-PLUGGING | | SURFACE TREATMENT | CADMIUM SLEEVE | | SURFACE TREATMENT | CADMIUM STEM |
|
|