|
|
|
National Stock Number:
5315-00-183-6361
Federal Supply Class:
5315
National Item Identification Number:
001836361
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 14-40618-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 14-40618-1 | 0RJC1 | GENESIS PROFESSIONAL SERVICES INC | | 14-40618-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.100 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.700 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | FIRST HOLE DIAMETER | 0.186 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST STEP DIAMETER | 0.557 INCHES MINIMUM AND 0.559 INCHES MAXIMUM | | FIRST STEP LENGTH | 1.996 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | NAI-1274 FSCM 76823 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 0.312 INCHES | | SECOND HOLE DIAMETER | 0.075 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND STEP DIAMETER | 0.369 INCHES MINIMUM AND 0.371 INCHES MAXIMUM | | SECOND STEP LENGTH | 0.549 INCHES NOMINAL | | SHEAR STRENGTH | 220000 SINGLE POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THIRD STEP DIAMETER | 0.312 INCHES NOMINAL | | THIRD STEP LENGTH | 0.355 INCHES NOMINAL | | THREAD LENGTH | 0.275 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNF |
|
|