|
|
|
National Stock Number:
5315-00-177-7649
Federal Supply Class:
5315
National Item Identification Number:
001777649
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 8447088-4 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.922 INCHES MINIMUM AND 2.937 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.120 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.107 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1112 OR STEEL COMP 1113 OR STEEL COMP 1117 OR STEEL COMP 1118 OVERALL | | PIN OVERALL LENGTH | 3.190 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3750 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.107 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232,TYM,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
|
|