| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| DIAMETER | 0.0932 INCHES MINIMUM AND 0.0934 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.042 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.037 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| HEIGHT | 0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | HS 2776 UNITED AIRCRAFT CORP,HAMILTON STANDARD DIV MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| PIN CHAMFER ANGLE | 18.0 DEGREES MINIMUM AND 22.0 DEGREES MAXIMUM |
| PIN HEAD DIAMETER | 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 32.0 MICROINCHES OVERALL |
| UNDER HEAD LENGTH | 0.600 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |