|
|
|
National Stock Number:
5315-00-173-2922
Federal Supply Class:
5315
National Item Identification Number:
001732922
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 685110-1 | 3B150 | RAYTHEON COMPANY | | 685110-1 | 49956 | RAYTHEON COMPANY | | 685110-1 | 54X10 | RAYTHEON COMPANY |
|
Techincal Specification:
| CHAMFER LENGTH | 0.040 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | ABMZ | | DIAMETER | 0.4994 INCHES MINIMUM AND 0.4998 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.094 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.090 INCHES NOMINAL | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 0.100 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | 300M,COLD DRAWN-G-1012 FSCM 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN HEAD DIAMETER | 0.625 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 125.0 MICROINCHES HEAD OUTSIDE DIAMETER | | SURFACE FINISH | 63.0 MICROINCHES SHANK END | | SURFACE TREATMENT | CADMIUM AND CHROMIUM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNDER HEAD LENGTH | 1.812 INCHES NOMINAL |
|
|