|
|
|
National Stock Number:
5315-00-172-6937
Federal Supply Class:
5315
National Item Identification Number:
001726937
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 180952-1 | 71791 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| CHAMFER LENGTH | 0.020 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | ABMZ | | DIAMETER | 0.3721 INCHES MINIMUM AND 0.3724 INCHES MAXIMUM | | HARDNESS RATING | 54.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | CPS4907 FSCM 71791 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 16.0 MICROINCHES SHANK END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837 TYPE 2 CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNDER HEAD LENGTH | 1.025 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
|
|