|
|
|
National Stock Number:
5315-00-158-4451
Federal Supply Class:
5315
National Item Identification Number:
001584451
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 1128BM42091-15 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 1128BM42091-15 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.265 INCHES MINIMUM AND | | 0.297 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.3739 INCHES MINIMUM AND | | 0.3744 INCHES MAXIMUM | | SHANK DIAMETER | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 1.783 INCHES MINIMUM AND | | 1.815 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END TAPER LENGTH | 0.053 INCHES MINIMUM AND | | 0.063 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 10.0 DEGREES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.265 INCHES MINIMUM AND | | 0.297 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.076 INCHES MINIMUM AND | | 0.086 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.083 INCHES MINIMUM AND | | 0.145 INCHES MAXIMUM | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | CRITICALITY CODE JUSTIFICATION | AAVH | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 79RG9 | | DESIGN CONTROL REFERENCE | 1128BM42091-15 |
|
|