|
|
|
National Stock Number:
5315-00-057-3539
Federal Supply Class:
5315
National Item Identification Number:
000573539
Description:
PIN,HOLLOW
Detail:
A CYLINDRICALLY-SHAPED HEADLESS ITEM, HAVING A STRAIGHT SMOOTH BODY AND A HOLE THROUGH THE LONGITUDINAL CENTER. ITS LENGTH MUST NOT EXCEED FIVE TIMES ITS DIAMETER OR 12 INCHES (304 MM), WHICHEVER IS GREATER. EXCLUDES BEARING, SLEEVE; AND PIN, PISTON.
|
Manufacturer Information:
| 215-34613-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4340 AND | | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD 1ST MATERIAL RESPONSE AND | | CVA1-585,COND C-1 FSCM 16615 MFR REF 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | HARDNESS RATING | 43.0 ROCKWELL C MINIMUM AND | | 46.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND | | 47.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | PIN OVERALL LENGTH | 3.530 INCHES NOMINAL | | PIN OVERALL DIAMETER | 1.4960 INCHES MINIMUM AND | | 1.4980 INCHES MAXIMUM | | INSIDE DIAMETER | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | BOTH ENDS COUNTERBORED 1.120 IN. DIA BY 0.600 IN. DEEP,COUNTERBORED ENDS COUNTERSUNK 60.0 DEGREES BY 0.104 IN. DEEP /OPTIONAL/ | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80378 | | DESIGN CONTROL REFERENCE | 215-34613-1 |
|
|