|
|
|
National Stock Number:
5310-00-209-6865
Federal Supply Class:
5310
National Item Identification Number:
002096865
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 538025 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 538025 | 6K4C8 | GOODRICH CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.252 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | OVERALL DIAMETER | 1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-626 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 1,CL 1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY 1,CL 2 FED SPEC 2ND TREATMENT RESPONSE OR QQ-P-416 TY 1,CL 3 FED SPEC 3RD TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.095 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
|
|