|
|
|
National Stock Number:
5310-00-209-5451
Federal Supply Class:
5310
National Item Identification Number:
002095451
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| LTCT10552-02 | 54878 | ROTAIR AEROSPACE CORP | | LTCT10552-02 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM | | HOLE DIAMETER | 1.150 INCHES MINIMUM AND 1.210 INCHES MAXIMUM | | OVERALL DIAMETER | 1.590 INCHES MINIMUM AND 1.650 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3227 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER SYNTHETIC OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.160 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
|
|