|
|
|
National Stock Number:
5310-00-209-1510
Federal Supply Class:
5310
National Item Identification Number:
002091510
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 1226-00 | 78189 | ITW SHAKEPROOF AUTOMOTIVE PRODUCTS | | 3F9559 | 11083 | CATERPILLAR INC | | AN936A916 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | ASAB271 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | MS35333-45 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35333-45 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.576 INCHES MINIMUM AND 0.596 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.957 INCHES MINIMUM AND 0.985 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL | | STYLE DESIGNATOR | FLAT INTERNAL TEETH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL |
|