|
|
|
National Stock Number:
5310-00-209-0790
Federal Supply Class:
5310
National Item Identification Number:
002090790
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 015-0020-40 | 61317 | TBV INC | | 373-8070-000 | 13499 | ROCKWELL COLLINS, INC. | | 824636-009 | 02769 | LOCKHEED MARTIN CORPORATION | | 824636-009 | 56232 | LOCKHEED MARTIN CORPORATION | | 824636-9 | 02769 | LOCKHEED MARTIN CORPORATION | | 824636-9 | 56232 | LOCKHEED MARTIN CORPORATION | | 8FF-W-100 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35335-63 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.384 INCHES MINIMUM AND 0.398 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.670 INCHES MINIMUM AND 0.694 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | MATERIAL | STEEL COMP 410 OVERALL | | STYLE DESIGNATOR | FLAT EXTERNAL TEETH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35,TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|