|
|
|
National Stock Number:
5310-00-209-0762
Federal Supply Class:
5310
National Item Identification Number:
002090762
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 2190-0010 | 1MY97 | AGILENT TECHNOLOGIES, INC. | | 2190-0010 | 28480 | HEWLETT-PACKARD COMPANY | | 900268-03 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 900268-03 | 90536 | LOCKHEED MARTIN CORP | | MILW6986TYPEB | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS35335-73 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI C1050 THRU C1064 OR SAE 1050 THRU 1064 MIL STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | FLAT EXTERNAL TEETH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL |
|