|
|
|
National Stock Number:
5310-00-209-0027
Federal Supply Class:
5310
National Item Identification Number:
002090027
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10116678 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 25039-48 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | 5310PL2054390 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 812066-00 | 32345 | DEFENSE REDUCTION AGENCY | | 9387511121 | S4080 | PILATUS AIRCRAFT LTD | | CSA46199 | 82254 | CURTIS DYNA-FOG, LTD. | | MS 20002-4 | 0291H | ROSOMAK S.A | | MS20002-4 | 1YQE8 | ALLIANT TECHSYSTEMS OPERATIONS LLC | | MS20002-4 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20002-4 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20002-4 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE | | MS20002-4 | A0311 | TECNO TRADE S.R.L. | | MS20002-4 | AC910 | AERTEKNO S.R.L. | | MS2000204 | 97499 | BELL TEXTRON INC | | MS21333-51 | 18076 | UMPCO, INC. | | NAS143-4 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.252 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL DIAMETER | 0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1330 OR STEEL COMP 4130 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THICKNESS | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
|
|