|
|
|
National Stock Number:
5310-00-208-9687
Federal Supply Class:
5310
National Item Identification Number:
002089687
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 47-620-332-1 | 04614 | TEXTRON SYSTEMS CORPORATION | | 47-620-332-1 | 80070 | LOCKHEED MARTIN CORPORATION | | 47-620-332-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| DRIVE POINT DIAMETER | 0.201 INCHES MINIMUM AND 0.207 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 12 | | DRIVE POINT DEPTH | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM | | COUNTERSINK ANGLE | 109.5 DEGREES MINIMUM AND 110.5 DEGREES MAXIMUM NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8630 OVERALL | | NOMINAL THREAD SIZE | 1.750 INCHES | | NUT DIAMETER | 3.083 INCHES MINIMUM AND 3.103 INCHES MAXIMUM | | NUT THICKNESS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | SMALL END DIAMETER | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES | UN |
|
|