| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.344 INCHES NOMINAL |
| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4118 ASSN STD SINGLE MATERIAL RESPONSE BASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4118 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | ALUMINUM ALLOY 2017 NUT |
| MATERIAL | ALUMINUM ALLOY 2017 BASE |
| MATERIAL | FIBER LOCKING INSERT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| NUT HEIGHT | 0.313 INCHES NOMINAL |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| NUT STYLE | PLATE |
| NUT LENGTH | 1.078 INCHES NOMINAL |
| PLATE THICKNESS | 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| PLATE WIDTH | 0.530 INCHES NOMINAL |
| SURFACE TREATMENT | ANODIZE BASE |
| SURFACE TREATMENT | ANODIZE NUT |
| TEMP RATING | 250.0 FAHRENHEIT NOMINAL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES | UNF |